中英文叉车上门保养服务协议书

精品范文 时间:2023-11-30 07:12:49 收藏本文下载本文

第1篇:中英文叉车上门保养服务协议书范本

中英文叉车上门保养服务协议书范本

1.甲方的责任

1.1甲方将对乙方拥有的.叉车提供每季度的定期上门保养服务。每台车每年(或每_________小时)保养4次。

1.2完成每次保养服务之后,_________将向乙方提供一份叉车状况报告,其中包括建议采取的措施。

1.3甲方将向乙方提供每年一次免费的日常检查培训。

1.4_________叉车平均使用寿命为_________年(_________小时),视各行业的设备使用年限标准而不同。

1.5_________叉车的质保期为_________小时或一年,保修期内,提供四次免费保养。2.乙方的责任

2.1甲方将提供保养用润滑脂及润滑油,保养所需易损件需另行购买。

2.2乙方应填写简短报告,并将其传真给_________办事处,以便_________安排保养及维修工作。

2.3乙方将在收到发票后一个月内付给甲方保养及其它服务或维修费用。

2.4乙方须在双方约定的时间将叉车提供给甲方维修人员做保养。否则须向甲方维修人员付等候费每小时_________元。

3.服务费

3.1每台叉车每年四(4)次定期保养服务,收费为人民币_________元(即rmb_________/次/每台车)。交通费免收。

3.2其它不在保修期限内的维修或故障修理的费用为每小时_________元,另收配件费。

3.3结算方式:每完成一次结算一次。

4.协议期限

此协议期限为12个月,从自货物到达到货买方工厂并调试合格之日起十二个月或_________工时后(产品使用期之较短者为产品的保修期)算起。

5.更新或终止

5.1协议期满后,双方将回顾协议的条款条件及执行情况,以决定是否更新或终止。

5.2在协议执行期间,如双方不能达成一致以解决冲突或争执,任何一方都可提前三十天书面通知另一方以终止协议。

甲方(签字):_________ 乙方(签字):_________

_________年____月____日 _________年____月____日

附件:

typical maintenance agreement

1.party a responsibilities

(1)party a will provide year/ 3 month periodical maintenance service to the forklift trucks owned by party bin party b ’s factory.this periodical maintenance service will be carried out for four (4) times per year(or per _________ hours)for each unit.

(2)a condition report with recommend action to be taken will be come out to party bafter completing each periodical maintenance service.

(3)daily check training will be conducted to party b ’s forklift operators once a year for free of charge.

(4)the average life of _________ truck is _________years (_________ hours), which may vary in different field of industry according to its own use.

2.party bresponsibilities

(1)grease and all kinds of lubrication oil will be provided by party a . parts will be purchased by the party b .

(2)party bcomplete a short report , and fax it to _________ office who will used these information to schedule the maintenance and other repair.

(3)party bwill pay _________ invoices for the maintenance service and other additional service or repair within one

month after receipt of the invoices.

(4)make sure the truck will be available for _________ mechanic to carry on the maintenance job at the agreed time by both parties.otherwise will pay for the cost of one waiting mechanic for rmb_________ per an hour.

3.service fee

(1)_________ hour / 3 month periodical maintenance service to the forklift truck will be charged for rmb_________ for four (4) times a year to one truck(rmb_________/time/unit). free trafffic fee.

(2)any other service and breakdown repair that is not covered by warranty will be charged on hours spent against rate of rmb_________ per hour, plus parts replaced.

(3)settlement term: settle after maintenance every time.

4.term of the agreement

this agreement shall have a term of _________months, commencing on 12 months or _________operation hours whichever comes first.

5.renew and termination

(1)by the end of the term, both parties will review this agreement with its terms and conditions, and service performance to renew or terminate it.

(2)during the course of the performance of the agreement, if the parties cannot reach an agreement to resolve a conflict or dispute, either party may terminate the agreement by giving the other party a written notice 30 days in advance.

party a(signature):_________ party b(signature): _________

date:_________________________ date:_________________________

第2篇:叉车上门保养服务协议

1.甲方的责任

1.1 甲方将对乙方拥有的叉车提供每季度的定期上门保养服务。每台车每年(或每_________小时)保养4次。

1.2 完成每次保养服务之后,_________将向乙方提供一份叉车状况报告,其中包括建议采取的措施。

1.3 甲方将向乙方提供每年一次免费的日常检查培训。

1.4 _________叉车平均使用寿命为_________年(_________小时),视各行业的设备使用年限标准而不同。

1.5 _________叉车的质保期为_________小时或一年,保修期内,提供四次免费保养。2.乙方的责任

2.1 甲方将提供保养用润滑脂及润滑油,保养所需易损件需另行购买。

2.2 乙方应填写简短报告,并将其传真给_________办事处,以便_________安排保养及维修工作。

2.3 乙方将在收到发票后一个月内付给甲方保养及其它服务或维修费用。

2.4 乙方须在双方约定的时间将叉车提供给甲方维修人员做保养。否则须向甲方维修人员付等候费每小时_________元。

3.服务费

3.1 每台叉车每年四(4)次定期保养服务,收费为人民币_________元(即rmb_________/次/每台车)。交通费免收。

3.2 其它不在保修期限内的维修或故障修理的费用为每小时_________元,另收配件费。

3.3 结算方式:每完成一次结算一次。

4.协议期限

此协议期限为12个月,从自货物到达到货买方工厂并调试合格之日起十二个月或_________工时后(产品使用期之较短者为产品的保修期)算起。

5.更新或终止

5.1 协议期满后,双方将回顾协议的条款条件及执行情况,以决定是否更新或终止。

5.2 在协议执行期间,如双方不能达成一致以解决冲突或争执,任何一方都可提前三十天书面通知另一方以终止协议。

甲方(签字):_________ 乙方(签字):_________

_________年____月____日 _________年____月____日

附件:

typical maintenance agreement

1.party a responsibilities

(1)party a will provide year/ 3 month periodical maintenance service to the forklift trucks owned by party b in party b ’s factory.this periodical maintenance service will be carried out for four(4)times per year(or per _________ hours)for each unit.(2)a condition report with recommend action to be taken will be come out to party b after completing each periodical maintenance service.(3)daily check training will be conducted to party b ’s forklift operators once a year for free of charge.(4)the average life of _________ truck is _________years(_________ hours),which may vary in different field of industry according to its own use.2.party b responsibilities

(1)grease and all kinds of lubrication oil will be provided by party a.parts will be purchased by the party b.(2)party b complete a short report,and fax it to _________ office who will used these information to schedule the maintenance and other repair.(3)party b will pay _________ invoices for the maintenance service and other additional service or repair within one month after receipt of the invoices.(4)make sure the truck will be available for _________ mechanic to carry on the maintenance job at the agreed time by both parties.otherwise will pay for the cost of one waiting mechanic for rmb_________ per an hour.3.service fee

(1)_________ hour / 3 month periodical maintenance service to the forklift truck will be charged for rmb_________ for four(4)times a year to one truck(rmb_________/time/unit).free trafffic fee.(2)any other service and breakdown repair that is not covered by warranty will be charged on hours spent against rate of rmb_________ per hour,plus parts replaced.(3)settlement term: settle after maintenance every time.4.term of the agreement

this agreement shall have a term of _________months,commencing on 12 months or _________operation hours whichever comes first.5.renew and termination

(1)by the end of the term,both parties will review this agreement with its terms and conditions,and service performance to renew or terminate it.(2)during the course of the performance of the agreement,if the parties cannot reach an agreement to resolve a conflict or dispute,either party may terminate the agreement by giving the other party a written notice 30 days in advance.party a(signature):_________ party b(signature): _________

date:_________________________ date:__________________________

第3篇:叉车保养

叉车日常保养维护管理规定

操作注意事项:

1、经培训并持有驾驶执照的司机方可开车;

2、在开车前检查各控制和警报装置,如发现损坏或有缺陷时,应在修理后操作;

3、搬运时不应超过规定负荷,货叉须全部插入货物下面,并使货物均匀放在货叉上,不许用单个货叉尖挑货物;

4、平稳地进行起动、转向、行驶、制动和停止,在潮湿的或光滑的路面,转向时须减速 ;

5、装物行驶应把货物放低,门架后倾;

6、坡道行驶应小心行驶,在大于十分之一的坡道是行驶时,上坡应向前行驶,下坡应后退行驶,上、下坡忌转向,叉车在行驶时,请勿进行装卸作业;

7、行驶时应注意行人、障碍物和坑洼路面,并注意叉车上方的空隙;

8、不准人站在货叉上,车上不准载人;

9、不准人站在货叉下,或在货叉下行走;

10、不准从司机座以外的位置上操纵车辆和属具;

11、不要搬运未固

未完,继续阅读 >

第4篇:叉车保养标准

叉车保养标准要求

要使叉车工作正常可靠,发挥叉车潜在能力,要有经常维护措施。技术维护保养措施,一般为:

1、日常维护,每班工作后。

2、一级技术保养,累计工作100小时后,一班工作制相当于2周。

3、二级技术保养,累计工作500小时后,一班工作制相当于一个季度。

一、日常维护

1、清洗叉车上污垢、泥土和垢埃,重点部位是:货叉架及门架滑道、发电机及起动器、蓄电池电极叉柱、水箱、空气滤清器。

2、检查各部位的紧固情况,重点是:货叉架支承、起重链拉紧螺丝、车轮螺钉、车轮固定销、制动器、转向器螺钉。

3、检查脚制动器、转向器的可靠性、灵活性。

4、检查渗漏情况,重点是:各管接头、柴油箱、机油箱、制动泵、升降油缸、倾斜油缸、水箱、水泵、发动机油底壳、变矩器、变速器、驱动桥、主减速器、液压转向器、转向油缸。

5、放去机油滤清

未完,继续阅读 >

第5篇:叉车保养总结

电动叉车使用注意事项

电瓶叉车辆使用中特别应注意及时对蓄电池充电和蓄电池的正确维护。蓄电池充电时要注意方法,既要使蓄电池充足电,又不能造成蓄电池过量充电。

在电动车辆操作中,尽量少使用长时间长距离加速,当车辆起步,速度提升后,稳住加速踏板,如路况较好,车辆会继续加速。

车辆需减速时,放松加速踏板,轻踏制动踏板,这样可充分利用减速的能量,如果车辆具有再生制动功能,即可使减速时的动能得以回收。

车辆在坡道下行时,不要断开驱动电动机的电路,轻轻踩下制动踏板,使车辆运行于再生制动状态,利用车辆下行的动能,减少蓄电池的能量消耗。

车辆运行中,切勿将“前进、倒退”的方向开关误当作转向开关。除非需要紧急减速,否则不要直接将制动踏板踏到底。

车辆运用过程中,发现电池电量不足时(可通过电量表、电源亏电指示灯和其他报警装置得

未完,继续阅读 >

第6篇:内燃叉车日常保养

内燃叉车日常保养以全车清洁、润滑和检查各部状态为主,由本车驾驶员负责。驾驶员应严格按照日常保养的内容及技术要求,每班进行一次,发现叉车出现异常状态时应及时处理。

日常保养包括使用前检查、工作中检查和回库后保养,具体项目如下:

1、使用前检查项目

1)检查燃油、润滑油、液压油和冷却液是否加足。

2)检查全车油、水有无渗漏现象。

3)检查各仪表、信号、照明、开关、按钮及其他附属设备工作情况。

4)检查发动机有无异响,工作是否正常。

5)检查转向、制动、轮胎和牵引装置的技术状况及紧定情况。

6)检查起升机构、倾斜机构、叉架和液压传动系统的技术状况及紧定情况。

7)检查随车工具及附件是否齐全。

2、工作中检查项目

工作中检查通常在工作2h左右进行。

1)检查发动机、底盘、工作装置、液压系统、仪表及信号装置的工作情况。

2)检查

未完,继续阅读 >

下载中英文叉车上门保养服务协议书word格式文档
下载中英文叉车上门保养服务协议书.doc
将本文档下载到自己电脑,方便修改和收藏。
点此处下载文档

文档为doc格式

相关专题
热门文章
点击下载本文